# Zen Lab > Cronus Zen latency and polling, explained Source-based explanations of Cronus Zen latency, controller polling and test methods. Manufacturer claims and outside measurements are attributed. Subjects: Cronus Zen latency, Cronus Zen polling rate, Cronus Zen firmware, anti-recoil tuning, controller input testing. Notes by Dana Rehn at https://cronuszenlab.com/, published as Zen Lab. All notes in a single file: https://cronuszenlab.com/llms-full.txt. ## The Zen in brief, 18 November 2026 - Latest Cronus Zen firmware: 2.4.1, dated 17 November 2026, one day after 2.4.0. Per Cronus's [2026 changelog](https://guide.cronuszen.com/changelogs/changelog-26), checked 18 November, 2.4.1 fixes programming over Zen Link and 2.4.0 fixes DualShock 4 and DualSense mic and audio on PS4, PS5 and Xbox along with Xbox Wi-Fi reconnection after the pad sleeps. Neither entry states a latency figure ([firmware notes](https://cronuszenlab.com/reference/input-latency-by-firmware)). - Does the Cronus Zen add input lag? Zen Lab has published no measurement of the Zen's own delay, and Cronus's guide gives no latency figure for it. The published sources place a pass-through device such as the Zen in the peripheral stage of NVIDIA's latency model, because the console reads the Zen's reports in place of the controller's, and a wired pad then crosses two USB polling schedules ([the latency budget](https://cronuszenlab.com/reference/what-adds-controller-input-latency)). - How much delay does polling rate add? A wait of zero to one full interval on every press: up to 8 ms at 125 Hz and up to 1 ms at 1000 Hz ([polling rate](https://cronuszenlab.com/reference/controller-polling-rate-explained)). - Can two input-lag numbers be compared? Only when they time the same stretch of the chain. A camera rig and an electrical button tap time different stretches, so their figures cannot be set side by side ([measurement methods](https://cronuszenlab.com/reference/how-input-latency-is-measured)). ## Cronus software versions, read 18 November 2026 The Zen Link module had four releases in November: 2.1.5 on 4 November, 2.1.6 and 2.1.7 on 6 November, then 2.2.0 on 16 November, which can read a slot's script back and copy it to another slot. Zen Studio Live, the browser version of Zen Studio, reached v1.0.12 on 17 November; since v1.0.11 of 16 November it needs firmware 2.4.0 or newer for full operation. Any future original result would apply only to its recorded versions, and a software change calls for a new comparison ([how re-tests work](https://cronuszenlab.com/reference/retesting-after-firmware-and-patches)). ## Reference - [Constant recoil correction vs a curve: how to compare them](https://cronuszenlab.com/reference/anti-recoil-curve-tuning): A method for comparing constant and time-varying correction without unsupported performance claims. - [Cronus Zen firmware latency: what release notes establish](https://cronuszenlab.com/reference/input-latency-by-firmware): How to separate firmware fixes from measured input-lag improvements. Release notes do not establish a fastest firmware. - [Cronus Zen on PS5 vs Xbox: how to compare input lag](https://cronuszenlab.com/reference/cronus-zen-ps5-vs-xbox-series-latency): Why console totals alone cannot isolate the latency added by a Cronus Zen. - [Does a heavier Cronus Zen script add input lag?](https://cronuszenlab.com/reference/cronus-zen-script-load-latency): How to distinguish script processing load from end-to-end input latency without assuming a fixed penalty. - [How to measure an NBA 2K green window](https://cronuszenlab.com/reference/nba-2k-green-window-measurement): A green window is a timing-response curve, not the same number as a script green percentage. - [Input-lag test equipment: what a reproducible report needs](https://cronuszenlab.com/reference/test-rig): A checklist for documenting press detection, response detection, timing and the full test chain. - [Reviewing latency claims after firmware and game updates](https://cronuszenlab.com/reference/retesting-after-firmware-and-patches): How to decide what needs a new source check or a new physical test after a software change. - [Wired vs wireless through Cronus Zen: what to compare](https://cronuszenlab.com/reference/cronus-zen-wired-vs-wireless-latency): Connection type alone does not determine latency. Compare the same controller, host and display under recorded conditions. - [Zen Link Native Mode vs PS5 bypass: setup and latency claims](https://cronuszenlab.com/reference/zen-link-native-mode-vs-ps5-bypass-latency): Separate connection instructions from claims that one PS5 route is measurably faster. ## Method - [How input latency is measured: cameras, photodiodes and button taps](https://cronuszenlab.com/reference/how-input-latency-is-measured): Input lag is timed from a press to its result. What high-speed cameras, screen photodiodes, solenoids and electrical button taps each include and can resolve. - [How much delay does controller polling rate add?](https://cronuszenlab.com/reference/controller-polling-rate-explained): Up to one USB interval per press: 8 ms at 125 Hz, 1 ms at 1000 Hz. How bInterval sets the rate, with published DualSense and Xbox Series figures. - [What adds latency between a controller press and the screen](https://cronuszenlab.com/reference/what-adds-controller-input-latency): Every stage from a controller press to the screen adds delay. Published figures and bounds for each, from pad firmware and USB polling to the game frame and TV. ## Who writes the notes - [Dana Rehn](https://cronuszenlab.com/authors/editorial): Technical editor. Dana Rehn writes source-based explanations of Cronus Zen latency, polling and measurement methods. Dana funds the work personally, distinguishes manufacturer claims from outside measurements, and controls the conclusions. ## Site pages - [About Zen Lab](https://cronuszenlab.com/about): Dana Rehn explains Cronus Zen latency, polling and measurement methods using attributed sources. - [Zen Lab editorial standards](https://cronuszenlab.com/editorial-policy): Source attribution, numerical claims and corrections for the Zen Lab reference notes. - [Zen Lab methodology: sources, comparisons and measurement limits](https://cronuszenlab.com/methodology): How Zen Lab attributes outside findings and explains test design without presenting unsupported original measurements. ## Optional - [Sitemap](https://cronuszenlab.com/sitemap.xml): note and reference URLs, dated by their last edit - A note as markdown: start the path with /md, like https://cronuszenlab.com/md/reference/anti-recoil-curve-tuning